Iron

Material information

Iron is the fourth most common element in the earth’s crust and the most common element on earth, even before oxygen. A silvery-grey coloured metallic lump in appearance. It is usually found in mineral form as it oxidises easily. When used in relation with other elements to create alloys it is proven to be substantially tougher. By far the most common of industrial metals, because of its relatively low cost and exceptional mechanical properties.

Details

Composition1. Ferro Boron Granules (Carbothermic) - Boron -20.0 – 22.0wt%, Iron - Balance 2. Iron Flake – 99.95% 3. Iron Lump – Commercial Grade 4. Iron Powder – 99.0% 5. Iron Round Section Bar – Commercial Grade
Common metallic impuritiesAvailable upon request for any option listed
Physical Description1. Granules - Silvery-grey coloured metallic crushed lump. Piece size approximately 1 to 30mm. 2. Flake - 5 to 40 mm length. 1 to 12 mm thickness. 3. Lump - Nominal piece size: 100mm x 75mm x 75mm Other sizes may be acceptable by prior agreement. 4. Powder Sieve Analysis +150 µm (0.0 %) 75 µm – 150 µm (2.0% max) 45 µm – 75 µm (Bal) <45 µm (80% min) Apparent density 2.80 ± 0.10 g/cc Particle size (FSSS) < 5µm 5. Round section bar – 30-35mm diameter by, nominally, 400mm length. Shot blasted and free from surface scale. Packaging: 1. Packed in sealed polythene bags and supplied in securely sealed metal drums, resistant to the impregnation of water. 2. Packed in sealed polythene bags and supplied in securely sealed metal drums, resistant to the impregnation of water. 3. Packed in sealed polythene bags and supplied in securely sealed metal drums, resistant to the impregnation of water. 4. The material is packed in 25kgs plastic bags with 1,000kgs (ie. 40 bags) shrink-wrapped onto a wooden pallet. 5. Packed in sealed polythene bags and supplied in securely sealed metal drums, resistant to the impregnation of water.
Analytics ICP-OES
Certificate of analysisAvailable upon request
Packaging1. Packed in sealed polythene bags and supplied in securely sealed metal drums, resistant to the impregnation of water. 2. Packed in sealed polythene bags and supplied in securely sealed metal drums, resistant to the impregnation of water. 3. Packed in sealed polythene bags and supplied in securely sealed metal drums, resistant to the impregnation of water. 4. The material is packed in 25kgs plastic bags with 1,000kgs (ie. 40 bags) shrink-wrapped onto a wooden pallet. 5. Packed in sealed polythene bags and supplied in securely sealed metal drums, resistant to the impregnation of water.

Request Pricing